Shop Grid – 3 Columns

Standard Blank White PVC Cards are the most commonly used ID cards – featuring standard credit card size in 30 mil thickness (known as CR8030 cards) – and work in nearly every ID card printer. This versatile blank pvc card can be used in many types of ID applications.

• Microprocessor ti omap4 @ 1 Ghz
• RAM memory: 1 BG, flash memory: 8 GB
• OS Microsoft windows embedded compact 7 (wec7) or android v4.4*
• 2D imager (standard range) megapixel sensor for extended range
• Local area network (WLAN) TI Wi-link 8, IEEE 802.11a/b/g/n

• Detect before deactivation
• Cash register controlled deactivation using an input
• LED output for label detection
• Synchronization with our RF systems
• Remote maintenance
• Selectable buzzer volume
• Count deactivation with a time stamp
• The distinction between successful and failed deactivations
•  Dual loop support (parallel)
• Use different antenna loops and scanner loops
• Detection distance Detection with 4 x 4 cm paper label 3 up to 30 cm up to 30 cm
• Deactivation 4 x 4 cm paper label 3 up to 33 cm up to 33 cm

• Print method – Direct thermal
• Print speed – 260mm/sec
• Print media width – 80mm
• Auto cutter
• USB, serial & Ethernet Port
• Driver/Utility – Windows & Linux

• 15’’Bezel Free True Flat Display with PCAP Touch,
• Intel® Celeron® J3455 Quad Core (2m Cache, 2.42 GHz Burst 4 Core
• All Variations come with a 128GB SSD
• 4GB OR 8GB RAM Variants
• Can be purchased with or without windows 10 IOT
• 6 x USB (2 Rear ,4 Back)
• 4 x Serial – Com1 5v/12v power output on 9 pin BIOS), Com 2&3 Rj45 full signal, Com 4 Rj11 only TX/RX, 12v Reserved for CDP
• 1 x Gigabit Ethernet, Rj 45
• 1 x VGA Output

• Fast and accurate verification
• Readily accessible for any finger
• Auto-On™ – automatic finger detection technology (when used with apps built with SecuGen SDKs)
• Smart Capture™ – self-adjusting scanning technology (when used with apps built with SecuGen SDKs)
• Device Recognition™ – device authentication technology (when used with apps built with SecuGen SDKs)
• Fingerprint template encryption (when using SecuGen Proprietary template format)
• Latent print rejection (does not accept prior fingerprints left behind on sensor)
• Compact, lightweight and portable

• XPOS CASH DRAWER BCD-410/ 5 notes or 4notes/ 8 coins
• Metal Note Gripper
• Micro-Switch
• 24 Volt / 1 A Solenoid
• Connector Cable 1.60 meter from the base
• check slots on the front panel
• 3 position key lock

• All-in-one POS Computer @ 1.8 GHz
• 4GB RAM
• 32 GB SSD
• 14 Inches LED Display

• Cable Connect
• 2D CODES (QR, RSS/GS1 codes), 1D LINEAR CODES (Barcodes),
• IMAGER SENSOR Field of View: 48 x 37º (H x V)
• Roll (Tilt): +/- 360°; Skew (Yaw): +/- 65°
• Includes USB cable and stand. Color: Black.

• S51 Black Monochrome Ribbon K
• (prints 1200 cards )

• Incotex 181 formerly Mercury 130W ETR machine is a KRA approved mobile cash register
• Upon purchase it is configured to reflect company details.
• Requirements: Copy of the KRA PIN CERTIFICATE to configure the ETR machine
• Compliant with the new KRA Tims system

• Impact/DotMatrix
• 9 Pin serial, 5 Lines/sec,
• Horizontal Vertical resolution: 80dpi x 144dpi
• Paper width 76mm, Paper roll diameter max 83mm.